Bollom Intulac Ultra (Clear) Top Coat (Satin or Matt)

Bollom Intulac™ Ultra Top Coat (Satin): - should be applied over Bollom Intulac™ Ultra Varnish Base Coat to provide a Class 0 fire rated protective / decorative varnish system for interior wood.

It is easy to apply and ideal for use in communal areas.

The Bollom Intulac™ Ultra varnish system provides a high performance fire protection coating system for interior wood surfaces. It comprises a clear, transparent, water-based intumescent base coat – designed to form a protective carbon char in the event of fire, delaying the inflammation of the wood – and a clear, transparent, solvent-based protective top coat (available in Matt and Satin finishes)

It dramatically reduces the ignitability of soft and hard woods and other wood derivatives including plywood, chipboard, fibre insulation board, hard board and veneer (less than or equal to 12mm thick

It also insulates against heat, inhibits spread of flame and diminishes flue gas density and flue gas temperature. Bollom Intulac™ Ultra Protective Top Coat must be applied over Bollom Intulac™ Ultra Intumescent Base Coat. Drying time: At approx. +20°C temperature and 60% relative humidity: through dry after 6 hours. Only apply Bollom Intulac Ultra Protective Top Coat over Bollom Intulac Ultra Base Coat after approx. 48 hours.

As a general rule a 500ml of topcoat will cover the same area as a 5lt of the clear Intulac intumescent basecoat

How do I get Fire Certification? It's simple, just keep proof of purchase, batch numbers of the products used along with site details and contact our Customer Services Department with all the relevant information on 0191 410 6611 and they will send you the relevant Certificate of Supply within 5 working days.