Blackfriar Professional High Traffic Floor Paint

An exceptionally hard-wearing- high performance, easy-toclean 2-pack solvent based floor coating ideal for indoor and outdoor use. Provides outstanding resistance to a wide range of chemicals. Non-yellowing and excellent colour fastness.

Available in the full range of RAL, NCS and BS4800 colours

Preparation - Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. Prepared surfaces with residual oil contamination should be primed with Blackfriar Professional Oil Tolerant Primer. New concrete must be left for at least 6 months before applying Blackfriar Professional High Traffic Floor Paint. Power-floated floors should either be blast tracked or treated with Blackfriar Professional Acid Etch followed by thorough rinsing. New or exposed bare concrete should be primed with Blackfriar Professional Water Based Epoxy Floor Primer

Mixing - Base and activator supplied in correct proportions. Add all activator to base container and mix thoroughly for at least 5 minutes until product is smooth and even. Allow to rest 5 minutes before using. DO NOT MIX PART UNITS. Badly activatedor incorrectly mixed materials will affect performance and may cause early failure or discolouration. The mixed material has a usable pot life of 6 hours (20o C).